The term ?dissipation loss? can be found in the info sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be able to protect the pressure sensor from overheating.
If a pressure sensor is operated in a hot environment, it can be necessary to limit its electrical energy. If one neglects this aspect, one possibly risks an overheating and with this, in the worst case, a complete failure of the instrument. Just how can Uplifting be managed?
Determination of the right electrical connection on the basis of the dissipation loss
First, the maximum permissible electrical energy for the pressure sensor must be known. This is given in the data sheet because the dissipation loss. Please be aware that the dissipation loss could be dependent upon the utmost expected operating temperature of the instrument and should be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then your actual maximum electrical power for the pressure sensor that occurs could be determined. The determination can be executed expediently in two steps:
1. Determination of the voltage at the pressure transmitter utilizing the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the utmost electrical energy for the pressure transmitter through the following equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical energy for the pressure transmitter (PPressure transmitter), that is now known, should be smaller compared to the permissible dissipation loss. If this is actually the case, both the power (UVoltage source) and the strain (RLoad) were properly calculated and the electrical energy of the pressure sensor will undoubtedly be within the permissible range under all operating conditions. Consequently, the pressure transmitter will not heat too strongly and will withstand the required operating temperatures.
Note
Should you need any advice, your contact will gladly help you.g